E 150 V8-4.6L SOHC VIN W (2004)
5. Remove the bolts and the two upper radiator mounting brackets.
6. CAUTION: Do not damage the cooling fins while handling the radiator.
Move the radiator back to gain access.
7. Remove the two A/C condenser mounting brackets.
8. CAUTION: Do not damage the cooling fins while handling the A/C condenser core.
Remove the A/C condenser core.
9. NOTE: LH seal shown, RH seal similar.
Remove the two seals.
1
Remove the eight retaining pins.
2
Remove the two seals.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install new O-ring seals lubricated in clean PAG oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.