E 150 V8-4.6L SOHC VIN W (2004)
11. Disconnect the passenger air bag module electrical connector.
12. Attach restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
13. Install the RCM fuse F2.20 (10A) to the CJB.
14. Connect the battery ground cable.
Reactivation Procedure
1. Remove the RCM fuse F2.20 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
4. Connect the passenger air bag module electrical connector.
