E 150 V8-4.6L SOHC VIN W (2004)
5. Remove the pinch bolt and if necessary, use a suitable puller to remove the adjuster from the axle.
6. Install the new service adjuster. Orient the slot as noted in Step 5.
1
Position the new adjuster as specified in the chart.
2
Install the pinch bolt.
7. Install the front wheel.
8. Check the alignment. If not at optimal caster/camber specification, additional adjustment of the rotational orientation of the adjuster is required.
9. Once optimal caster/camber has been achieved, reset the toe and clear vision to optimal settings.
