ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

TorqShift Automatic Transmission|Page 2714 > < TorqShift Automatic Transmission|Page 2712
Page 1
background image

Fluid Filter - A/T: Service and Repair
4R70W/4R75W Automatic Transmission

Fluid Pan, Gasket and Filter

Material

Removal

1. CAUTION:  Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal

transmission components to fail; this will effect the operation of the transmission.

CAUTION:  Use of a fluid other than specified could result in transmission failure.

NOTE:  Normal maintenance requires periodic automatic transmission fluid changes. If a major repair, such as a clutch, band, bearing, etc., is
required, the automatic transmission will also have to be removed for repair. At this time, the torque converter, transmission cooler and tubes must
be thoroughly flushed to remove any dirt. The transmission fluid needs to be changed if evidence of fluid contamination is found. When used
under continuous or severe conditions, the transmission and torque converter should be drained and refilled with fluid as specified.

With the vehicle in NEUTRAL, position it on a hoist.

2. Loosen but do not remove the transmission fluid pan bolts and allow fluid to drain. Once the fluid is drained remove the bolts.

3. Remove the transmission fluid pan and transmission fluid pan gasket.

TorqShift Automatic Transmission|Page 2714 > < TorqShift Automatic Transmission|Page 2712