E 150 V8-4.6L SOHC VIN W (2004)
Fuel Injector Wiring Harness: Service and Repair
FUEL CHARGING WIRING HARNESS
REMOVAL
All vehicles
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
1. Relieve the fuel pressure.
2. Disconnect the battery ground cable.
3. Remove the engine cover.
4. Remove the engine air cleaner, the air cleaner outlet tube and the accelerator splash shield.
5. Disconnect the LH radio frequency interference capacitor and cylinder head temperature (CHT) sensor electrical connectors.
6. Disconnect the camshaft position (CMP) sensor electrical connector.
7. Disconnect the RH radio frequency interference capacitor electrical connector.