E 150 V8-4.6L SOHC VIN W (2004)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSOR
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the air cleaner assembly.
3. CAUTION: Do not tamper with the mass air flow (MAF) sensing elements located in the airflow meter. Tampering may result in unit
failure.
NOTE: The MAF sensor and body are calibrated and serviced as a unit.
Open the air cleaner.
-
Release the air cleaner clamp.
-
Separate the inlet side from the outlet side of the air cleaner.
4. Remove the MAF assembly.
5. Disconnect the MAF sensor electrical connector.