Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Sensors and Switches > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Engine Temperature Sensor > Component Information > Locations > Page 2081

Page 1
background image

Engine Temperature Sensor: Service and Repair

CYLINDER HEAD TEMPERATURE (CHT) SENSOR

REMOVAL

1. Disconnect the battery ground cable.
2. Remove the air cleaner and bracket assembly.

3. Rotate the drive belt tensioner clockwise and remove the drive belt from the generator pulley.

4. Remove the bolts retaining the upper intake plenum to the generator mounting bracket.

5. Remove the lower mounting bolts and position the generator aside.

6. Disconnect the intake manifold-tuning valve (IMTV) connector.

Sensors and Switches > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Engine Temperature Sensor > Component Information > Locations > Page 2081

[PREV PAGE] [NEXT PAGE]