Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Sensors and Switches > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Ignition Lock Cylinder - Functional

Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional

IGNITION LOCK CYLINDER - FUNCTIONAL

REMOVAL

NOTE:  When a new lock cylinder is installed, the door lock cylinder and ignition lock cylinder should be installed as a set. This eliminates carrying and
extra key which will fit only one lock. If a new key is used, the new key code number is stamped on a metal tag attached to the key.

1. Disconnect the battery.

2. Remove the ignition switch lock cylinder.

1

Turn the ignition to the ON position.

2

Using a suitable tool, press the ignition switch lock cylinder release pin while pulling out the ignition switch lock cylinder.

INSTALLATION

1. To install, reverse the removal procedure.

Sensors and Switches > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Ignition Lock Cylinder - Functional

[PREV PAGE] [NEXT PAGE]