Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Service and Repair > 4R100 Automatic Transmission > Page 2530

Page 2
background image

1. Install the digital TR sensor.

1. Install the digital TR sensor. 
2. Loosely install the bolts.

2. NOTE:  The manual lever must be in the NEUTRAL position.

Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.

3. CAUTION:  Tightening one screw before tightening the other may cause the sensor to bind or become damaged.

Tighten the digital TR sensor bolts.

4. Install the manual control lever.

1. Position the manual control lever.
2. Install a new manual control lever nut.

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Service and Repair > 4R100 Automatic Transmission > Page 2530

[PREV PAGE] [NEXT PAGE]