Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Service and Repair > 4R100 Automatic Transmission > Page 2533

Page 2
background image

6. Using the special tool, remove the manual valve detent lever shaft retaining pin.

7. CAUTION:  Be careful not to damage the manual control lever bore.

Remove the manual control lever shaft assembly.

8. Remove the transmission range sensor and detent lever assembly.

1. Remove the bolts.
2. Remove the transmission range sensor and detent lever assembly.
3. Disconnect the park rod from the detent lever assembly.

Installation

1. Install the transmission range sensor and detent lever assembly.

1. Connect the park rod to the detent lever assembly.
2. Install the transmission range sensor and the detent lever assembly.

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Service and Repair > 4R100 Automatic Transmission > Page 2533

[PREV PAGE] [NEXT PAGE]