E 150 V8-4.6L SOHC VIN W (2004)
Transmission Speed Sensor: Service and Repair
TorqShift Automatic Transmission
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the intermediate shaft and turbine shaft combination speed sensor electrical connector.
3. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of debris to prevent contamination of the
transmission.
Remove the intermediate shaft and turbine shaft combination speed sensor.
1. Remove the bolt.
2. Remove the intermediate shaft and turbine shaft combination speed sensor.
Installation
1. Install the intermediate shaft and turbine shaft combination speed sensor.
1. Lubricate the O-ring and install the intermediate shaft and turbine shaft combination speed sensor.
2. Install the bolt.