Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Pressure Regulating Solenoid, A/T > Component Information > Service and Repair > 4R70W/4R75W Automatic Transmission

Page 1
background image

Pressure Regulating Solenoid: Service and Repair
4R70W/4R75W Automatic Transmission

Electronic Pressure Control (EPC) Solenoid

Special Tool(s)

Removal

1. Remove the manual control lever.

2. CAUTION:  Do not pull on the molded lead frame. This may cause damage to the connector ends. Carefully pry up on the locking tabs to

disconnect the solenoids. Disconnect the molded lead frame from the solenoids.

Disconnect the molded lead frame from the solenoids.
1. Disconnect the shift solenoid SSA and SSB.
2. Disconnect the torque converter clutch (TCC).
3. Disconnect the electronic pressure control (EPC) solenoid.
4. Disconnect the bulkhead inter-connector.

3. Remove the EPC solenoid. 

1. Remove the bolt and EPC solenoid bracket. 
2. Remove the EPC solenoid.

Installation

Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Pressure Regulating Solenoid, A/T > Component Information > Service and Repair > 4R70W/4R75W Automatic Transmission

[PREV PAGE] [NEXT PAGE]