E 150 V8-4.6L VIN W (2006)
Install the 4 engine support insulator-to-crossmember nuts.
^
Tighten to 90 Nm (66 ft. lbs.).
10. Position the flexplate inspection plate and install the 2 bolts.
^
Tighten to 34 Nm (25 ft. lbs.).
11. Install the 2 upper transmission-to-engine bolts.
^
Tighten to 60 Nm (44 ft. lbs.).
12. NOTE: Lubricate the new O-ring seals with clean engine coolant prior to installation.
Install the heater outlet tube.
Romeo engines (4.6L)
13. Install the 2 heater outlet tube studs.