E 150 V8-5.4L (2008)
20. Position the belt idler pulley and install the bolt.
^
Tighten to 25 Nm (18 lb-ft).
21. Position the coolant pump pulley and install the 4 bolts.
^
Tighten to 25 Nm (18 lb-ft).
22. Rotate the tensioner clockwise and install the accessory drive belt.
23. NOTE: LH shown, RH similar.
Install the 2 radio interference capacitors and the 2 nuts.
^
Tighten to 25 Nm (18 lb-ft).