E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Antenna Cable: Service and Repair
1. Remove the radio antenna mast from the antenna base.
2. Remove the antenna base.
1
Remove the radio antenna base cap.
2
Remove the antenna base screws.
3
Lift the antenna base.
4
Disconnect the radio antenna lead in cable from the antenna base and remove the antenna base.
3. Remove the fender splash shield.
1
Remove the fender splash shield screws.
2
Remove the pushpin retainer and remove the splash shield.
4. Push the (A) radio antenna lead in cable and (B) grommet into passenger compartment.
