ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Condenser HVAC > < Compressor Fitting HVAC|Specifications|Page 8910
Page 5
background image

6. Connect the A/C pressure cut-off switch electrical connector.
7. Install the engine air cleaner and the air cleaner outlet tube.
8. Replace the suction accumulator/drier.

Note:  If a refrigerant line is being replaced due to failure, the suction accumulator/drier must be replaced at the same time.

9. Reconnect the battery ground cable.

Note:  When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

10. Evacuate, charge, and leak test the A/C system. See: Service and Repair/Evacuation
11. Check the A/C system for proper operation.

Condenser HVAC > < Compressor Fitting HVAC|Specifications|Page 8910