E 150 1/2 Ton Van V8-5.4L SOHC VIN L (1997)
Engine Mount: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the throttle body.
3. Remove the vapor management valve.
4. Partially drain the cooling system and disconnect the radiator upper hose at the radiator.
5. Remove the two upper fan shroud screws and position the fan shroud toward the engine.
6. For the RH front engine support insulator, remove the starter motor.
7. Remove the nuts retaining the front engine support insulator to the front subframe.
8. Remove the nut retaining the transmission filler tube at the rear of the RH cylinder head and position the tube aside.
9. Raise and support the vehicle.