E 150 1/2 Ton Van V8-5.4L SOHC VIN L (1997)
Wiper Pivot: Service and Repair
Windshield Wiper Mounting Arm and Pivot Shaft
REMOVAL
1. Remove the windshield wiper pivot arms.
NOTE: The windshield wiper mounting arm and pivot shaft is serviced as an assembly.
2. Remove the cowl top vent panels.
3. Disconnect the windshield wiper mounting arm and pivot shaft.
1. Remove the access cover from the dash panel.
2. Remove the mounting arm and pivot shaft retaining clip.
3. Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.
4. Remove the windshield wiper mounting arm and pivot shaft.
1. Remove the four screws.
2. Remove the windshield wiper mounting arm and pivot shaft.
INSTALLATION