Front Door Window Regulator Replacement Guide
Front Door Window Regulator: Service and Repair
WINDOW REGULATOR
Heavy Duty Riveter
Special Tool(s)
Removal
1. Remove the front door window glass.
2. Remove the window regulator electric drive (if so equipped).
3. NOTE: Use care not to enlarge the sheet metal holes in the door inner panel.
Remove the center pins from the rivets, using a drift. Using a 1/4-inch diameter drill, drill out the rivets attaching the window regulator lower
bracket to the inner panel.
4. Remove the nuts retaining the window regulator upper bracket to the door inner panel.
5. Remove the window regulator.
Installation