E 250 V10-6.8L VIN S (2005)
Headliner: Service and Repair
HEADLINER
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
Front and Rear
1. NOTE: Front headliner must be removed to remove rear headliner.
Remove the visor and visor attaching clips.
2. Remove the A-pillar trim panel.
3. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide.
Remove the front shoulder safety belt guide cover.
4. Remove the shoulder safety belt guide.
1
Remove the shoulder safety belt guide nut.
2
Remove the shoulder safety belt guide.
