E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-1711005.png)
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
Press the caliper piston into the caliper bore, being careful not to cock the caliper piston.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
1. Remove the brake pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
3. To install, reverse the removal procedure.