E 250 V10-6.8L VIN S (2005)
Brake Master Cylinder: Service and Repair
Brake Master Cylinder
BRAKE MASTER CYLINDER
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
All vehicles
1. Disconnect the battery.
2. Use a suitable suction device to remove the brake fluid from the brake master cylinder reservoir.
3. Remove the coolant reservoir bolts and position the reservoir aside.
4. Disconnect the speed control deactivator switch connector.
5. Disconnect the brake fluid level switch electrical connector.