E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-939002.png)
4. Remove the bolts and the instrument panel reinforcement bracket.
5. Remove the screws and position the wire harness aside.
6. Remove the screws and the heater core cover.
7. NOTE: Use care not to spill the coolant remaining in the heater core during removal.
Remove the heater core.
8. To install, reverse the removal procedure.
-
Clean and lubricate the coolant hoses with plain water only, if needed.
9. Fill the engine cooling system.