E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-943001.png)
Radiator: Testing and Inspection
Radiator Leak Test, Removed From the Vehicle
CAUTION: Never leak test an aluminum radiator in the same water that copper/brass radiators are tested in. Flux and caustic cleaners may be
present in the cleaning tank and they will damage aluminum radiators.
NOTE: Always install plugs in the oil cooler fittings before leak-testing or cleaning any radiator.
NOTE: Clean the radiator before leak-testing to avoid contamination of tank.
1. Leak-test the radiator in clean water with 138 kPa (20 psi) air pressure.
2. If a stream of air bubbles is observed coming from the radiator, note the location and install a new radiator.