E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-869006.png)
6. Position back the oil level indicator and tube. Install the bolt.
7. Tighten the retaining nut.
8. Position the fuel charging wiring onto the valve cover studs.
9. Connect the pushpin retainers to the PCM bracket.
6. Position back the oil level indicator and tube. Install the bolt.
7. Tighten the retaining nut.
8. Position the fuel charging wiring onto the valve cover studs.
9. Connect the pushpin retainers to the PCM bracket.