E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-918002.png)
1. CAUTION: Always fill the cooling system with the same coolant that is present in the system. Do not mix coolant types.
Install a new O-ring on the coolant pump. Coat the new O-ring with engine coolant.
2. CAUTION: Do not rotate the coolant pump housing once the coolant pump has been positioned in the cylinder block. Damage to the O-ring seal
will occur.
Install the coolant pump.
1
Lubricate the new O-ring seal using engine coolant and install the O-ring seal onto the coolant pump.
2
Position the coolant pump into the engine block.
3
Install the bolts.
3. Position the pulley onto the coolant pump and install the bolts.
4. Install the accessory drive belt.
5. Install the fan and fan clutch.