E 250 V10-6.8L VIN S (2005)
Compass: Adjustments
Compass Calibration
COMPASS CALIBRATION
1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential
electrical accessories (rear window defrost, heater A/C, map lamps, wipers, etc.) and make sure all doors are closed.
Start the vehicle.
2. NOTE: To exit CAL mode before carrying out a compass adjustment, turn the ignition switch to the OFF position.
Locate the electronic compass/temperature display on the overhead console, press and hold the SELECT button until CAL appears in the display,
then release the SELECT button.
3. NOTE: If the CAL indicator does not turn off after the vehicle has been driven in a circle no more than five times, demagnetize the vehicle and
repeat the procedure.
Drive the vehicle slowly (less than 5 km/h [3 mph]) in complete circles until CAL disappears from the display.