E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-2545008.png)
6. Bend Wire 1 back in a straight line.
NOTE: Wait for solder to cool before moving wires.
7. Evenly position heat shrink tubing over wire repair.
NOTE: Overlap tubing on both wires.
6. Bend Wire 1 back in a straight line.
NOTE: Wait for solder to cool before moving wires.
7. Evenly position heat shrink tubing over wire repair.
NOTE: Overlap tubing on both wires.