E 250 V10-6.8L VIN S (2005)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT
Removal and Installation
1. Detach the air cleaner dirty air inlet tube from the plastic seal on the radiator support, rotate the tube up, and remove it.
2. Unlatch the clamp on the air cleaner assembly and remove the air cleaner tray.
3. Remove the air cleaner (ACL) element.
4. To install, reverse the removal procedure.
-
Align the tab on the air cleaner cover with the slot in the tray assembly.
-
Make sure the band clamp is over both the tray and the cover, and is latched closed.