E 250 V10-6.8L VIN S (2005)
Fuel Injector Wiring Harness: Service and Repair
FUEL CHARGING WIRING HARNESS
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited, resulting in possible personal injury.
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the engine air cleaner and the air cleaner outlet tube.
4. Disconnect the two electrical connectors and disconnect the connectors from the bracket.
5. Disconnect the push pin retainers from the powertrain control module (PCM) bracket.
6. Disconnect the PCM electrical connectors.