E 250 V10-6.8L VIN S (2005)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSOR
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the air cleaner assembly.
3. CAUTION: Do not tamper with the mass air flow (MAF) sensing elements located in the air flow meter. Tampering can result in unit
failure.
Open the air cleaner.
-
Release the air cleaner clamp.
-
Separate the inlet side from the outlet side of the air cleaner.
4. Release the latches and remove the MAF assembly.
5. NOTE: The red clip must be pulled out before disconnecting the electrical connector.
Disconnect the MAF sensor electrical connector.