E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-2094002.png)
5. Disconnect the clockspring electrical connectors at the base of the steering column.
6. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the steering wheel.
7. If so equipped, twist the tilt wheel handle and shank and remove.
8. Remove the lower steering column shroud.
1
Remove the three screws.
2
Remove the steering column shroud.
9. Remove the ignition switch lock cylinder.
1
Position the lock cylinder to RUN.