E 250 V10-6.8L VIN S (2005)
Seat Belt: Service and Repair
Safety Belt With Anchor Plate Thread Damage
SAFETY BELT WITH ANCHOR PLATE THREAD DAMAGE
1. Remove the broken or stripped bolt and discard.
2. Drill out the internal threads in the seat belt anchor plate with a 27/64-inch drill.
3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
4. Blow out the chips.
5. Install the safety belt component(s).
6. Install a new bolt with the same part number, unless otherwise specified.
7. Tighten the bolt(s) to specification.