E 250 V10-6.8L VIN S (2005)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler
Removal
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can occur.
1. Remove the transmission fluid cooler.
2. Disconnect the power steering hoses at the fluid cooler.
3. Remove the 2 power steering cooler bolts and remove the power steering cooler.
Installation
1. To install, reverse the removal procedure.
^
Install the transmission cooler.
^
Fill and leak check the system.