E 250 V10-6.8L VIN S (2005)
7. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the driver air bag module.
1
Remove the two steering wheel back cover plugs.
2
Remove the two driver air bag module bolts.
3
Disconnect the horn electrical connector.
4
Disconnect the clockspring electrical connector.
5
Remove the driver air bag module.
8. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of the steering column.
9. Remove the RH lower instrument finish panel.
10. Remove the RH lower instrument panel reinforcement.