E 250 V10-6.8L VIN S (2005)
Steering Gear: Adjustments
Steering Gear Meshload Adjustment
Special Tool(s)
1. NOTE: The engine should not be running.
Turn the steering wheel from right lock to left lock at least once.
2. Remove the driver air bag.
3. Raise and support the vehicle.
4. Remove the castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
5. Separate the steering sector shaft arm drag link.
^
Use the Pitman Arm Puller to separate the steering sector shaft arm drag link.
6. NOTE: The front wheels should not touch the ground.
