E 250 V10-6.8L VIN S (2005)
Shift Interlock Cable: Service and Repair
Selector Lever Cable and Bracket
Selector Lever Cable and Bracket
Removal and Installation
NOTE: To prevent shift cable damage, do not apply force to the transmission shift cable assembly between the steering column shift tube bracket and
the steering column bracket.
1. Remove the instrument panel steering column cover, the driver side knee brace and the instrument panel steering column opening cover
reinforcement.
2. Disconnect the shift cable.
1. Disconnect the shift cable from the steering column shift tube lever.
2. Carefully lift the locking tab and disconnect the shift cable from the steering column bracket.
3. Push the rubber grommet and the transmission shift cable through the bulkhead.
4. With the vehicle in NEUTRAL, position it on a hoist.