E 250 V10-6.8L VIN S (2005)
3. Remove the bolts and the skid plate (4x4 only).
4. Remove the bolts and the air deflector.
5. Release the constant tension clamp from the cooler outlet to auxiliary cooler inlet fitting hose at the auxiliary cooler and disconnect the hose.
6. Release the constant tension clamp from the auxiliary cooler return hose to the remote mount fluid filter housing inlet hose at the bottom of the
radiator. Separate the hoses.
7. Remove the remaining bolts from the oil-to-air (OTA) transmission fluid cooler.
Installation
CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage