E 250 V10-6.8L VIN S (2005)
Wiper Motor Linkage: Service and Repair
WIPER MOUNTING ARM AND PIVOT SHAFT
Removal and Installation
1. NOTE: The windshield wiper mounting arm and pivot shaft is installed as an assembly.
Remove the windshield wiper pivot arms.
2. Remove the cowl top vent panels.
3. Remove the access cover from the dash panel.
4. Remove the windshield wiper mounting arm bolt.
5. Remove the windshield wiper mounting arm and pivot shaft.
1
Remove the screws.
2
Remove the windshield wiper mounting arm and pivot shaft.
6. To install, reverse the removal procedure.