E 250 V8-4.6L VIN W (2006)
All seats
14. Separate all wire harness pin-type retainers attached to the cushion frame.
15. NOTE: The riser has been removed for clarity.
NOTE: Power seat shown (LH only), manual similar (RH and LH).
NOTE: Two rear seat track-to-cushion frame bolts shown. The 2 front bolts are accessible through the holes in the seat riser.
Remove the 4 seat track-to-cushion frame bolts.
To install, tighten to 25 Nm (18 lb-ft).
16. To install, reverse the removal procedure.