E 250 V8-4.6L VIN W (2006)
Material
2. Remove the brake disc and hub as follows:
1
Remove the hub grease cap.
2
Remove the cotter pin.
3
Remove the nut retainer.
4
Remove the spindle nut.
5
Remove the outer wheel bearing retainer washer.
6
Remove the outer wheel bearing.
7
Remove the brake disc and hub.
3. Remove the wheel hub grease seal and inner wheel bearing.
1
Remove the wheel hub grease seal.
2
Remove the inner wheel bearing.
4. Inspect the brake disc and resurface or install new as necessary.
Installation
1. Thoroughly clean and inspect the wheel bearings and the brake disc and hub.