E 250 V8-4.6L VIN W (2006)
Fan Shroud: Service and Repair
Cooling Fan - 4.6L, 5.4L and 6.8L
Special Tool(s)
Removal
All vehicles
NOTE: The fan, fan clutch and shroud must be removed and installed together due to insufficient clearance to remove them separately.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
3. Remove the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
4. Disconnect and position the radiator upper hose and the overflow hose from the radiator aside.
