E 250 V8-4.6L VIN W (2006)
27. Install the air cleaner outlet pipe and tighten the clamp.
28. Connect the crankcase ventilation tube quick connect coupling. For additional information, refer to Fuel Delivery and Air Induction.
29. Connect the MAF sensor and position the ACL.
30. Tighten the clamp and install the 4 nuts.
^
Tighten to 7 Nm (62 inch lbs.).
31. Install the engine cover.
32. Connect the battery ground cable. For additional information, refer to Battery.
33. Fill and bleed the engine cooling system. For additional information, refer to Cooling System.