E 250 V8-4.6L VIN W (2006)
4. Disconnect the air inlet door vacuum control motor vacuum connector.
5. Remove the 2 air inlet door vacuum control motor screws.
6. Remove the air inlet door vacuum control motor.
7. To install, reverse the removal procedure.
Floor/Defrost Door
VACUUM CONTROL MOTOR - FLOOR/DEFROST DOOR
Removal and Installation
1. Remove the access panel.
2. Disconnect the floor/defrost door vacuum control motor vacuum connectors.
3. Remove the 2 floor/defrost door vacuum control motor screws.
4. Remove the floor/defrost door vacuum control motor.
