E 250 V8-4.6L VIN W (2006)
G8-G9
Normal Operation
The restraint control module (RCM), vehicle security module (if equipped), and the anti-lock brake system (ABS) module (if equipped) communicate
with the diagnostic tool through the ISO 9141 communications network, circuit 70 (LB/WH). Check circuit 70 (LB/WH) between the RCM C310a,
the ABS module C135 and the data link connector (DLC) C251. The total resistance value must not be more than 5 ohms. If the resistance is more
than 5 ohms there is an open in the ISO 9141 communications network circuit, damage to the DLC C251, damage to the RCM C310a, or a problem in
an in-line connector.
Possible Causes
-
ISO 9141 communications network circuit 70 (LB/WH) open, short to ground, or short to voltage
-
DLC C251
-
RCM C310a
-
ABS module C135
-
vehicle security module C203b
-
RCM
-
ABS module
-
vehicle security module (if equipped)
Test H: No Module/Network Communication - No Power To The Diagnostic Tool
PINPOINT TEST H: NO MODULE/NETWORK COMMUNICATION - NO POWER TO THE DIAGNOSTIC TOOL