E 250 V8-4.6L VIN W (2006)
Stabilizer Link: Service and Repair
Stabilizer Bar and Link
Removal and Installation
1. Remove the 2 stabilizer link upper bolts, washers and nuts.
^
Discard the bolts and nuts.
^
To install, tighten to 70 Nm (52 ft. lbs.).
2. Remove the 2 stabilizer link lower nuts, washers and insulators.
^
Discard the nuts.
^
To install, tighten to 28 Nm (21 ft. lbs.).
3. Remove the 2 stabilizer bar links, washers and insulators.
4. Remove the 4 stabilizer bar bracket bolts, the 2 brackets and the stabilizer bar.
^
Discard the bolts.
^
To install, tighten to 40 Nm (30 ft. lbs.).
5. To install, reverse the removal procedure.
