E 250 V8-4.6L VIN W (2006)
![background image](/ford/e_250/v8-4.6l_vin_w/Page-1694004.png)
4. Connect the TR sensor connector.
5. Install the transmission fluid filter, pan gasket and pan.
6. Connect the solenoid body electrical connector.
^
Tighten to 5 Nm (44 inch lbs.).
Line Pressure Control Solenoid PC-A
Line Pressure Control Solenoid PC-A
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the transmission main control valve body.