E 250 V8-4.6L VIN W (2006)
![background image](/ford/e_250/v8-4.6l_vin_w/Page-1845002.png)
6. Using the special tool, remove the manual valve detent lever shaft retaining pin.
7. CAUTION: Be careful not to damage the manual control lever bore.
Remove the manual control lever shaft assembly.
8. Remove the transmission range sensor and detent lever assembly.
1
Remove the bolts.
2
Remove the transmission range sensor and detent lever assembly.
3
Disconnect the park rod from the detent lever assembly.
Installation
1. Install the transmission range sensor and detent lever assembly.