E 250 V8-4.6L VIN W (2006)
Universal Joint: Service and Repair
Driveshaft Universal Joint - Single Cardan, Slip Yoke
Driveshaft Universal Joint - Single Cardan, Slip Yoke
Special Tool(s)
Disassembly
Initial disassembly
1. CAUTION: Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can
result, causing shaft failure during vehicle operation.
Place the shaft on a suitable workbench. Do not damage the tube.
2. Remove and discard the 2 snap rings.
3. Clamp the special tool in a vise.
Bearing cup removal