Transmission Pressure Regulating Solenoid Repair (Page 6507)
![background image](/ford/e_250/v8-4.6l_vin_w/Page-1945002.png)
3. NOTE: While lowering the solenoid body, the manual valve may fall out of the solenoid body.
Remove the solenoid body.
1
Disconnect the transmission range (TR) sensor electrical connector.
2
Remove the solenoid body bolts.
3
Remove the solenoid body.
4. Remove the solenoid body gasket.
Installation
1. Install a new solenoid body gasket.